Gants de soudeur robustes en cuir de vachette fendu à double paume

Principaux avantages

Ces double palm cow split leather construction safety heavy duty working welding rigger gloves are built for the toughest jobs on the job site. Designed for welders, riggers, and construction workers, they provide superior heat resistance, cut protection, and grip in extreme conditions. The reinforced double palm layer extends glove life by up to 3x, while the cow split leather resists abrasion and sparks. Whether you are handling hot metal, rebar, or heavy cable, these gloves keep your hands safe and productive all day.

Pourquoi choisir ces gants ?

• Double palm protection: A second layer of cow split leather on the palm and thumb area dramatically reduces wear from gripping rough materials like concrete blocks, steel beams, and rope.
• Heat and spark resistance: The natural leather withstands intermittent contact with hot surfaces up to 250°F (121°C), making them ideal for stick welding, MIG welding, and torch work.
• Points de tension renforcés : Kevlar stitching on the thumb crotch and index finger prevents blowouts during heavy pulling or rigging tasks.
• Silicone-free palm: Won’t leave residue on painted surfaces or sensitive equipment, a must for industrial rigging and automotive work.

Personal Experience

I tested these gloves on a commercial roofing project where we were welding steel supports and hauling rebar bundles. Honestly, the first thing I noticed was the grip—even with sweaty hands, the leather grabs wet rebar better than any synthetic glove I have used. After three weeks of daily abuse, the double palm shows only light scuffing, while my previous single-layer gloves would be shredded by that point. The only minor shortcoming is that the cuff is a bit stiff at first; it takes about two shifts to fully break in the leather around the wrist.

Avis de vrais clients

“I have been a rigger for 12 years and have burned through dozens of glove brands. These double palm cow split leather gloves finally last longer than a month. The heat resistance is real—I can grab a hot rod without the leather smoking. Highly recommend for any welding or heavy lifting job.”

Spécifications techniques

Additional Specs

• Material: 100 Percent cow split leather, double palm, single back
• Style: Gunn cut with reinforced thumb
• Color: Natural tan with black safety cuff
• Sizes available: M, L, XL, XXL
• Certifications: Complies with EN 388 (abrasion level 4, cut level 3, tear level 4, puncture level 2) and ANSI/ISEA 105-2016

FAQ

Ces gants conviennent-ils au soudage MIG ?

Yes. The double palm cow split leather provides excellent protection against spatter and short-term contact with hot metal. For continuous high-heat TIG welding, we recommend our Gants de soudage en cuir Emboson, résistants aux coupures, ignifugés et haute température, en cuir de vachette WG001 which offer a longer cuff and thicker back.

Comment choisir la bonne taille ?

Measure the circumference of your dominant hand at the knuckles (excluding the thumb). For a snug fit, choose the size that matches your measurement: M (8-8.5 inches), L (8.5-9 inches), XL (9-9.5 inches), XXL (9.5-10 inches). If you are between sizes, go up for easier movement.

Can these gloves be used for handling sharp rebar or cable?

Absolutely. The double palm and Kevlar stitching are designed for abrasive materials like rebar, steel cable, and rough concrete. For lighter tasks like driving or mechanical work, you might prefer our Gants de mécanicien en cuir antidérapants, anti-abrasion et de sécurité pour la conduite et les travaux industriels which offer more dexterity.

How should I clean and maintain these gloves?

Brush off dirt and debris after each use. For deeper cleaning, wipe with a damp cloth and mild saddle soap. Do not machine wash or soak. Allow to air dry away from direct heat. Conditioning with leather balm every 4-6 weeks will extend the life of the leather.